You can build your DIY (Do it Yourself) poker table with just plywood, foam and felt. But it may not be great because more needs to be done. Building your own poker table is encompassing a lot, so read this before you start online gambling Malaysia, as we bring you the ultimate DIY guide to building your own poker table.
There are a lot of companies that sell you ready-made poker tables. They are available in various price ranges; from a $ 50 portable foldable felt top that can fit an existing table, to a high quality casino style private table with a wooden pedestal that costs $ 2,500 or more.
Doing it yourself is longer and harder, but the price / quality ratio is undeniable. Plus, you don’t have to be a cabinetmaker to build it. With the right equipment, patience and the right technique, you will make your perfect poker table.
What Tools And Materials Do You Need To Build Your Own Poker Table?
To build your own poker table you need several materials. For a DIY poker table, you will need to be able to read blueprints, have some basic carpentry skills Malaysia trusted online casino, and also be able to handle the padding.
- a circular saw
- a staple gun
- a drill with cruciform head for setting screws and dowels
- retractable blade knife
- pair of scissors
- two sheets of plywood
- carpenter’s glue
- folding feet set
- fabric for the poker table
- foam for upholstery
- vinyl / leather
- jacking bolts for the feet
Step 1: Prepare, Make A Plan And Make A Decision Based On Your Measurements
Due to the size of my garage (I’m playing in this room with my friends, I couldn’t build a full 2.50m long table, so I scaled down the plan and decided to build a 2m table. , which is more than enough for 8 players.
The dimensions of the table are exactly 208 cm long by 112 cm wide with a height of 76 cm. The legs are foldable for easy storage.
Step 2: Construction Of The Poker Table Itself
- Cut the plywood to the correct size for the intended table (from the first piece of plywood).
- Cut the top and bottom sections of the rails (from the second piece of plywood). The rail is the area a little higher on the contours of the table where you are probably used to resting your elbows …
- After cutting the rail sections, center them and attach the remaining smallest piece of oval plywood to the bottom of the first piece of plywood (the table top) using carpenter’s glue and drywall screws. Adding the remaining plywood to the bottom gives the table more stability and strength.
- Center and secure the folding legs to the bottom of the table. Once the legs are attached, hold the table straight.
- Apply carpenter’s glue to the top of the table and install the foam. Take a break while the glue hardens so the felt doesn’t move.
- Check and make sure the felt table top is secure and not moving. Now is the time to install the carpet.
- Center the mat. With a staple gun in hand, start in the middle of the table along the edge of one side and apply 3-4 staples about 2cm apart. Switch to the other side, stretch the felt firmly and straight, and reapply 3-4 staples about 2 cm apart. Then go side to side, firming and straightening and applying staples.
NOTE: Do not staple on the table top: staple only at the edges.
Step 3: Pad The Rail With Vinyl
That’s all for the table. Then there is the hard part: padding the rail with vinyl. To be honest, I couldn’t do it. I ended up entrusting the ramp to a professional upholsterer who carried out this task for 150 €. Regardless, I will describe how you pad the railing.
The first step to adding vinyl is exactly the same as upholstering the poker table. Just stretch the vinyl and staple it on all sides.
If this is your first poker table, you may want to wait until the interior of the table is finished as well before cutting the extra vinyl. Once the exterior is finished, you should have something that looks like a large drum.
Cut the vinyl down the middle and star at each end.
Now that you have the vinyl cut, the sides are extremely easy to remove. Make sure to pull the vinyl as hard as possible when putting on the staples. If you complete this step and your forearms aren’t sore, your poker table rail probably could have been better.
When you start on the ends of the table, you will find that you will probably have to keep making these cuts so that the vinyl wraps around the inside curve of the padded rail. Just make sure you don’t cut too close to the rail or you might end up with a tear in the vinyl showing on the finished poker table.
When you are done stapling the inside of the track, you can hammer in all the staples like you did before and cut all the extra vinyl.
Before cutting the extra vinyl, make sure that there are no significant folds in the rail.
Now that the playing surface and padded rail are complete, it’s time to put them together, and your very own custom poker table is complete.
In summary, if you want to take on the task of building your own poker table, you should be well versed in carpentry and the use of tools. And, of course, you should have these tools. You need to be familiar with padding and have a place to do all the work.
Depending on the style of table you want, it might just be easier for you to buy the table online.
Making a poker table at home can seem like a fun project for someone or a small group of people who are at least moderately comfortable putting together simple furniture. However, it is a lot of work and may involve tasks that even a reasonably manageable person will not be able to accomplish easily.…